Ask is moving to Stack Overflow and Serverfault.com! Please use the "opendaylight" tag on either of these sites. This site is now in Read-Only mode

Revision history [back]

click to hide/show revision 1
initial version

tracking path selected

hi,

i have create a custom topology in mininet and have install opendaylight.

setup custom mesh topology command: sudo mn --custom meshtopology.py --topo mytopo --controller=remote,ip=10.0.0.1

h1------------s1---------------s2----------------h2

         l   -\-    l

h3------------s3---------------s4----------------h4

links: (h1,s1) , (h2,s2), (h3,s3), (h4,s4), (s1,s2), (s1,s3), (s1,s4), (s2,s3), (s2,s4), (s3,s4)

on my opendaylight, i have install 'old-dlux-all' and 'odl-l2switch-switch-ui'.

i have down the link between (s1 and s4), like to see what path do the path go(from s2 or s3)? i have try traceroute on mininet to trace the path that the packet go but the result does't show the path.

my question are

1) How do i trace the path that the packet have enter from source address to destination address 2) is opendaylight able to show me what path has been selected

many thanks in advance. :)

tracking path selected

hi,

i have create a custom topology in mininet and have install opendaylight.

setup custom mesh topology command: sudo mn --custom meshtopology.py --topo mytopo --controller=remote,ip=10.0.0.1

h1------------s1---------------s2----------------h2

         l   -\-    l

h3------------s3---------------s4----------------h4

links: (h1,s1) , (h2,s2), (h3,s3), (h4,s4), (s1,s2), (s1,s3), (s1,s4), (s2,s3), (s2,s4), (s3,s4)

on my opendaylight, i have install 'old-dlux-all' and 'odl-l2switch-switch-ui'.

i have down the link between (s1 and s4), like to see what path do the path go(from s2 or s3)? i have try traceroute on mininet to trace the path that the packet go but the result does't show the path.

result:

traceroute 10.0.0.4

traceroute to 10.0.0.4 (10.0.0.4) 30 hop max, 60 byte packets 1 * 10.0.0.4 (10.0.0.4) 2.681 ms * 2.421 ms

my question are

1) How do i trace the path that the packet have enter from source address to destination address 2) is opendaylight able to show me what path has been selected

many thanks in advance. :)

tracking path selected

hi,

i have create a custom topology in mininet and have install opendaylight.

setup custom mesh topology command: sudo mn --custom meshtopology.py --topo mytopo --controller=remote,ip=10.0.0.1

h1------------s1---------------s2----------------h2

         l   -\-    l

h3------------s3---------------s4----------------h4

links: (h1,s1) , (h2,s2), (h3,s3), (h4,s4), (s1,s2), (s1,s3), (s1,s4), (s2,s3), (s2,s4), (s3,s4)

on my opendaylight, i have install 'old-dlux-all' and 'odl-l2switch-switch-ui'.

i have down the link between (s1 and s4), like to see what path do the path go(from s2 or s3)? i have try traceroute on mininet to trace the path that the packet go but the result does't show the path.

result:

result: command: traceroute 10.0.0.4

traceroute to 10.0.0.4 (10.0.0.4) 30 hop max, 60 byte packets 1 * 10.0.0.4 (10.0.0.4) 2.681 ms * 2.421 ms

my question are

1) How do i trace the path that the packet have enter from source address to destination address 2) is opendaylight able to show me what path has been selected

many thanks in advance. :)

tracking path selected

hi,

i have create a custom topology in mininet and have install opendaylight.

setup custom mesh topology command: sudo mn --custom meshtopology.py --topo mytopo --controller=remote,ip=10.0.0.1

h1------------s1---------------s2----------------h2

         l   -\-    l

h3------------s3---------------s4----------------h4

links: (h1,s1) , (h2,s2), (h3,s3), (h4,s4), (s1,s2), (s1,s3), (s1,s4), (s2,s3), (s2,s4), (s3,s4)

on my opendaylight, i have install 'old-dlux-all' and 'odl-l2switch-switch-ui'.

i have down the link between (s1 and s4), like to see what path do the path go(from s2 or s3)? i have try traceroute on mininet to trace the path that the packet go but the result does't show the path.

result: result:

command: traceroute 10.0.0.4

traceroute to 10.0.0.4 (10.0.0.4) 30 hop max, 60 byte packets 1 * 10.0.0.4 (10.0.0.4) 2.681 ms * 2.421 ms

my question are

1) How do i trace the path that the packet have enter from source address to destination address 2) is opendaylight able to show me what path has been selected

many thanks in advance. :)

tracking path selected

hi,

i have create a custom topology in mininet and have install opendaylight.

setup custom mesh topology command: sudo mn --custom meshtopology.py --topo mytopo --controller=remote,ip=10.0.0.1

h1------------s1---------------s2----------------h2

         l   -\-    l

h3------------s3---------------s4----------------h4

links: (h1,s1) , (h2,s2), (h3,s3), (h4,s4), (s1,s2), (s1,s3), (s1,s4), (s2,s3), (s2,s4), (s3,s4)

on my opendaylight, i have install 'old-dlux-all' and 'odl-l2switch-switch-ui'.

i have down the link between (s1 and s4), like to see what path do the path packet go(from s2 or s3)? i have try traceroute on mininet to trace the path that the packet go but the result does't show the path.

result:

command: traceroute 10.0.0.4

traceroute to 10.0.0.4 (10.0.0.4) 30 hop max, 60 byte packets packets

1 * 10.0.0.4 (10.0.0.4) 2.681 ms * 2.421 ms

my question are

1) How do i trace the path that the packet have enter from source address to destination address address

2) is opendaylight able to show me what path has been selected

many thanks in advance. :)

tracking path selected

hi,

i have create a custom topology in mininet and have install opendaylight.

setup custom mesh topology command: sudo mn --custom meshtopology.py --topo mytopo --controller=remote,ip=10.0.0.1

h1------------s1---------------s2----------------h2

         l   -\-    l

h3------------s3---------------s4----------------h4

links: (h1,s1) , (h2,s2), (h3,s3), (h4,s4), (s1,s2), (s1,s3), (s1,s4), (s2,s3), (s2,s4), (s3,s4)

on my opendaylight, i have install 'old-dlux-all' and 'odl-l2switch-switch-ui'.

i have down the link between (s1 and s4), like to see what path do the packet go(from s2 or s3)? i have try traceroute on mininet to trace the path that the packet go but the result does't show the path.

result:

command: traceroute 10.0.0.4

traceroute to 10.0.0.4 (10.0.0.4) 30 hop max, 60 byte packets

1 * 10.0.0.4 (10.0.0.4) 2.681 ms * 2.421 ms

my question are

1) How do i trace the path that the packet have enter from source address to destination address

2) is opendaylight able to show me what path has been selected

many thanks in advance. :)

tracking path selectedtrace path selected in mininet

hi,

i have create a custom topology in mininet and have install opendaylight.

setup custom mesh topology command: sudo mn --custom meshtopology.py --topo mytopo --controller=remote,ip=10.0.0.1

h1------------s1---------------s2----------------h2

         l   -\-    l

h3------------s3---------------s4----------------h4

links: (h1,s1) , (h2,s2), (h3,s3), (h4,s4), (s1,s2), (s1,s3), (s1,s4), (s2,s3), (s2,s4), (s3,s4)

on my opendaylight, i have install 'old-dlux-all' and 'odl-l2switch-switch-ui'.

i have down the link between (s1 and s4), like to see what path do the packet go(from s2 or s3)? i have try traceroute on mininet to trace the path that the packet go but the result does't show the path.path. i know traceroute only work on layer 3 network.

result:

command: traceroute 10.0.0.4

traceroute to 10.0.0.4 (10.0.0.4) 30 hop max, 60 byte packets

1 * 10.0.0.4 (10.0.0.4) 2.681 ms * 2.421 ms

my question are

1) How do i trace the path that the packet have enter from source address to destination addressaddress?

2) are there program that trace path in layer 2?

3) is opendaylight able to show me what path has been selectedselected?

many thanks in advance. :)

trace path selected in mininetin layer 2 (network)

hi,

i have create a custom topology in mininet and have install opendaylight.

setup custom mesh topology command: sudo mn --custom meshtopology.py --topo mytopo --controller=remote,ip=10.0.0.1

h1------------s1---------------s2----------------h2

         l   -\-    l

h3------------s3---------------s4----------------h4

links: (h1,s1) , (h2,s2), (h3,s3), (h4,s4), (s1,s2), (s1,s3), (s1,s4), (s2,s3), (s2,s4), (s3,s4)

on my opendaylight, i have install 'old-dlux-all' and 'odl-l2switch-switch-ui'.

i have down the link between (s1 and s4), like to see what path do the packet go(from s2 or s3)? i have try traceroute on mininet to trace the path that the packet go but the result does't show the path. i know traceroute only work on layer 3 network.

result:

command: traceroute 10.0.0.4

traceroute to 10.0.0.4 (10.0.0.4) 30 hop max, 60 byte packets

1 * 10.0.0.4 (10.0.0.4) 2.681 ms * 2.421 ms

my question are

1) How do i trace the path that the packet have enter from source address to destination address?

2) are there program that trace path in layer 2?

3) is opendaylight able to show me what path has been selected?

many thanks in advance. :)