Unable to ping host opendaylight beryllium

asked 2016-11-12 02:51:39 -0800

ybpranawa gravatar image

updated 2016-11-12 02:52:11 -0800

hello all, i'm new for this opendaylight software.

i've setup mikrotik as openflow switch with 4 ports enabled (and it's configured as masterport).

my mikrotik setup are :

ether3 = 192.168.3.1/24
ether4 = 192.168.4.1/24
ether5 = 192.168.5.1/24
ether6 = 192.168.6.1/24

my controller is connected at port ether7 which has an IP address 192.168.88.248/24 (it's bridged with ether2 (master) port).

everything it's allright before I add those 4 ports in openflow switch, each host can ping another.

But, the problem is when i add those 4 ports in openflow switch and it shows the topology, I can't ping each other.

I've enabled l2switch and it's still not working. What should I do?? please help to complete my undergraduate thesis, I will write your help in my thanks to chapter.

note : i'm using opendaylight beryllium SR4 downloaded from

edit retag flag offensive close merge delete